Sam Engineers

Reckoned amid one of the credible market names, we are willingly betrothed in offering to our patrons Teflon O Ring.

O rings are used primarily for sealing. O rings are used in two general design applications: Static (Non moving) & Dynamic (Moving). Static applications may range from vacuum to over 60000psi for sealing flanges and O ring grooves.

Other details:

• O Rings manufactured at Sam Engineers confirms to almost all the standards as mentioned below:-
• British Standard BS1806 Specification for Dimensions of toroidal sealing rings.
• US SAE AS568 Aerospace Size Standard for O-rings and the equivalent local standard.
• Australian Standard AS2842-1986 Fluid Power O-rings and Housings.
• And the commonly used Metric standards are:
• British Standard BS4518 Specification for Metric Dimensions of toroidal sealing rings.
• Japanese Standards Association JIS B 2401 O-rings and there are similar Swedish and French standards publications.
• German and International standards publications.

• Nitrile 70 & 90 Durometer
• Viton® 75 & 90 Durometer
• Neoprene
• EPDM
• Silicone
• Fluorosilicone
• Kalrez® - perfluoroelastomer
• SBR
• PTFE
• FEP Encapsulated Viton & Silicone

Being the leading name in the industry, we are betrothed in providing a precisely made Black Rubber O Ring to our privileged patrons.

Features:

• Less prone to leakage
• Lightweight
• Less squeeze to maintain an effective seal
• Damage-proof
• Long lasting

With the main aim to accomplish a high level of patron trust, we have been engrossed in providing a vast assortment of Silicone O Ring.

We are offering FKM O RINGS to our patrons.

We are offering PTFE O Ring to our client.

We are offering EPDM Rubber O Rings to our client.

We are offering Rubber O Ring to our Client.

We are offering Neoprene O Ring to our client.

Quad-Ring® Seals are four-lipped seals with a specially developed sealing profile that actually provides twice the number of sealing surfaces as an O-ring. The four-lobed design not only provides lower fiction than an O-ring but also, due to its square cross-section, it resists spiral twist. Quad-Ring® Seals are available in a wide range of elastomeric materials for both standard and special applications. Quad-Ring ® Seals are vulcanized as a continuous ring. Quad-Ring® Seals are supplied to the American Standard AS-568A and are completely interchangeable with O-rings in these sizes. 

Features:

• There are two sealing surfaces to give a positive seal with less friction. Due to an improved pressure profile over Quad-Ring© Seal cross-section, a high sealing effect is achieved.
• The recessed mold parting line provides no flash or parting line on the surface of the seal and ensures "zero leakage." What's more, a lubricant reservoir formed between the sealing lips improves performance at start-up.
• The quad cross-section resists spiral twisting and extrusion. Due to its special profile, the seal does not tend to twist in the groove during reciprocating movement.
• Twice the sealing surface means less radial squeeze is needed to create an effective seal resulting in less friction, less wear & and longer service life.

We are assisted by a crew of experienced personnel who are enormously indulged in bringing forth a broad gamut of Nitrile Rubber O Ring.

When a system is operating under high pressure, there is a greater performance demand on the O Ring. When subjected to a pressure, the O ring rubber tends to flow into the clearance gaps between the adjacent parts of the machine. At a lower pressure, the extrusion effect does not hamper the performance, however, at a high pressure, this can damage the O rings.

Thus, in order to avoid permanent damage to the O rings at high pressure, special precautions such using an appropriate Back-Up Rings need to be taken.

Specifications:

We offer Industrial Rubber O Ring.